Home » Avaya, Technology

Avaya Session Manager Server Install (Redhat Kickstart DVD Procedure): Part Two

Author: Daniel Voigtlander 20 February 2012 5,928 views 7 Comments
Tags: ,

Last week we installed the Avaya System Manager. Now we will go to the Session Manager Server. This is the Redhat Kickstart DVD procedure. You will load this on a separate server than the one you just loaded  System Manager on (make sure you have a monitor and keyboard attached as this will be your only way to initially interact with the sesman until you do the SMnetSetup in a later step).

  1. Insert SM Kickstart DVD into the DVD tray and restart server by unplugging it and plugging it back in.
  2. Disk will popout when the install is complete.
  3. At the command prompt login using craft/craft01.
  4. Type ls to list files.
  5. Type ./SMnetSetup and press enter the following input when the prompted:
    1. Server Hostname: sesman
    2. b.      Server IP: xxx.xxx.xxx.xxx
    3. Netmask: xxx.xxx.xxx.xxx
    4. d.      Gateway: xxx.xxx.xxx.xxx
    5. Domain: FQDN
    6. DNS: xxx.xxx.xxx.xxx
  6. After the last input press enter and then enter again.
  7. At the timezone selection screen choose Chicago, then highlight okay and press enter.
  8. Verify date… press enter.
  9. Verify time… press enter.
  10. At the yes (y) prompt press enter.
  11. Time and date has been set enter y, then press enter.
  12. Would you like to enable NTP, type No, then enter.
  13. Customer Account – y then enter.
  14. Login ID: cust
  15. Password: cust01
  16. Password again: cust01
  17. Press Enter to complete the installation of the base Linux.
  18. Press y then enter when prompted to reboot (disk will popout).
  19. After reboot log back in using craft/craft01.
  20. Then su – sroot/sroot01.
  21. Insert SM6.1 disk into drive.
  22. Type cd /dev, then press enter.
  23. Type mount cdrom /cdrom then press enter (will show as read only).
  24. Type cd /cdrom, press enter, then ls to list files.
  25. Type ./install.sh.
  26. Press enter when prompted to continue install.
  27. Enter the following when prompted:
    1. SMGR Address: created in step 14
    2. SMGR FQDN: created in step 14
    3. Enrollment Password: created in step 22
  28. Press enter to continue install. After install is completed, the command prompt will return. Log back in using craft/craft01.
  29. Type eject to remove CD.
  30. Log into SMGR using username/password created in step 18 [link to first post].
  31. Next, go to the Home Screen and click Routing.
  32. Click Domains, then click new and enter FQDN, click commit.
  33. Click Sip Entities on the left, then click New.
  34. In the Name field enter name created in step 42A.
  35. In the FQDN or IP Address field enter xxx.xxx.xxx.xxx (SM100 equivalent).
  36. Under Ports click add, then choose domain from the Default Domain dropdown list.
  37. Click Commit.
  38. Go back to the home screen and click on the Session Manager link.
  39. On the left side click Session Manager Admin.
  40. Under the Session Manager Instances, click New.
  41. From the Sip Entity dropdown choose Sesman (the one created earlier).
  42. In the Management IP field, enter xxx.xxx.xxx.xxx (not the same as step 36).
  43. In the Default GW field, enter xxx.xxx.xxx.xxx.
  44. Click Commit.
  45. Putty to Sesman using craft/craft01, then type initTM and enter enrollment password when prompted.
  46. Go back to SMGR and login. Then go to Session Manager link and click checkbox next to Sesman and change service state to Accept.
  47. Wait approximately 5 minutes for stabilization, then verify both levels of the security module are up.
  48. You are done and your system is now ready for beginning of class.

This will assist you in setting up your System and Session Manager systems. You will, of course, have to use addressing and names that are applicable to your network. This does not address ME templates. I will cover that in another post.

Avaya System and Session Manager Installation Series

1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading ... Loading ...

7 Comments »

  • lpascua said:

    i just want to know if i can install both avaya system manager and avaya session manager in one hp dl360g7 server?

  • Elizabeth Rainwater said:

    Yes, you should be able to as long as the server meets the specs.

  • Yuri said:

    Hi,
    To what procedure do the items correspond?

    Enter the following when prompted:

    SMGR Address: created in step 14
    SMGR FQDN: created in step 14
    Enrollment Password: created in step 22

    In the Name field enter name created in step 42A.

    where is 42a?

  • Yuri said:

    Also,
    In the Management IP field, enter xxx.xxx.xxx.xxx (not the same as step 36)–

    when and where was the Management IP configured in Session Manager?

  • Jack Sheeley said:

    This was AWESOME! Thank you very much. I was looking all over for this doc and it’s exactly what I needed.

  • Manju said:

    Hi,

    Thanks for sharing the above procedure, i tried above all steps it worked.
    But now I stuckup at session manager login with craft/craft01 mentioned as step 45 in your procedure. I am not able to login with craft as it is prompting for challenge/response.

    Please help on this, if i had done any mistake.

    Thanks,
    Manju.P

  • Danielle Beavers said:

    If you have made it to page 45 of the procedure, you have successfully installed Session Manager as an application. Once ASM is installed, the original craft and craftpw credentials are no longer available until you install the Authentication File. To log into the Session Manager, use the customer login and password you assigned at the time of the installation, I believe it’s set for cust/cust01. Upon the installation of the authentication file some of the default credentials within the application became available again. The only other way to login with system default passwords after you have installed Session Manager, is if you do know the response to the challenge/response prompts

Leave your response!

Add your comment below, or trackback from your own site. You can also subscribe to these comments via RSS.

Be nice. Keep it clean. Stay on topic. No spam.

You can use these tags:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

This is a Gravatar-enabled weblog. To get your own globally-recognized-avatar, please register at Gravatar.